216th ECS Meeting - Vienna, Austria

October 4 - October 9, 2009

PROGRAM INFORMATION
 

D2 - Coatings for Corrosion Protection

Corrosion
 

Monday, October 5, 2009

Hall L, Level 01 - Green

Keynote Session

Co-Chairs: G.S. Frankel and G. Grundmeier
TimeAbs#Title and Authors
09:05 Introductory Remarks (5 Minutes)
09:10   1749   Corrosion Protection By Conducting Polymers M. Rohwerder (Max-Planck Institute for Iron Research)
09:40   1750   Study Of The Adhesion And Delamination Of Organic Coatings On Steel By Controlling The Interfacial Properties W. Jan (Vrije Universiteit Brussel), P. Christian (Interfaces at the Max-Planck Institute für Eisenforshung), G. Guido (University of Paderborn), H. René (ArcelorMittal, R&D Industry Ghent), and H. A. Terryn (Vrije Universiteit Brussel)
 

Coatings for Al Alloys 1

Co-Chairs: G. Grundmeier and G.S. Frankel
TimeAbs#Title and Authors
10:10   1751   The Electrochemical and Structural Changes of Cerium Based Conversion Coatings During Exposure to a Salt Spray Environment W. Pinc, W. Fahrenholtz, and M. O'Keefe (Missouri University of Science and Technology)
10:30   1752   Microelectrochemical Testing of Cerium Based Conversion Coatings S. Joshi, M. O'Keefe, and W. Fahrenholtz (Missouri University of Science and Technology)
10:50   1753   Physical, Chemical and Electrochemical Investigations of Trivalent Chrome Process (TCP) Coatings Applied to Aluminum Alloys B. Lee, D. Woodbury, G. Swain, and G. M. Swain (Michigan State University)
11:10   1754   Corrosion Protection of 2024-T351 by a Mg-Rich Primer: Discrepancies between Field versus Laboratory Exposures A. D. King, M. Taylor, and J. Scully (University of Virginia)
11:30   1755   Investigation of Cathodic Properties of Mg-Rich Primers for Protection of AA2024-T3 D. Battocchi, K. N. Allahar, N. Richter, G. Bierwagen (North Dakota State University), and S. Hayes (Akzo Nobel Aerospace Coatings)
 

Coatings for Al Alloys 2

Co-Chairs: H.N. McMurray and T. Shinohara
TimeAbs#Title and Authors
14:00   1756   Corrosion Inhibition Of AA2024 By Decanoate Ions G. Boisier (CNRS), N. Portail (CIRIMAT/UMR CNRS 5085), and N. Pebere (CNRS)
14:20   1757   Modification of Anodic Layers On Aluminum Alloys To Improve Corrosion Resistance And Adhesion Properties S. K. Weidmann (DECHEMA e.V.), W. Fürbeth (Karl-Winnacker-Institut der DECHEMA e.V.), O. Yezerska (Fraunhofer IFAM), U. Sydow (TU Dresden, IfWW), and M. Schneider (Fraunhofer IKTS)
14:40   1758   Chitosan Films for Corrosion Protection of Galvanized Steel and Aluminum Alloys M. Zheludkevich, J. Tedim, S. Kallip, and M. Ferreira (Universidade de Aveiro)
15:00   1759   Cr-Free and Phosphate-Free Surface Treatments for Steel and Al Alloys S. Adhikari, Y. Guo, B. Rincon Troconis, K. Unocic, and G. Frankel (The Ohio State University)
15:20 Intermission (20 Minutes)
15:40   1760   Through The Corrosion Protection Of Al-2024 Alloy With Carbon Black/Epoxy-Amine Nanocomposite Coating. A. Foyet, W. Te-Hui, L. G. Van der Ven, A. Kodentsov, D. Gijsbertus, and R. A. Van Benthem (Eindhoven University of Technology)
16:00   1761   Alkoxysilyl Functionalized POSS Coatings As Anticorrosion Coatings For AA 2024 Alloy I. Jerman, A. Surca Vuk, M. Kozelj (National Institute of Chemistry), and J. Kovac (Institute Jozef Stefan)
16:20   1762   The Effect Of Different Amounts Of Modifiers On The Anticorrosion Properties Of Silane Layers Applied On Al Alloy 2024-T3 L. M. Palomino (Surtec International), P. Suegama, I. Aoki (São Paulo University), and H. G. De Melo (Polytechnic School of the University of Sao Paulo)
16:40   1763   Assessment of the Corrosion Inhibition Properties of Sol-gel Coatings Modified With Hydroxyapatite Particles Doped With Corrosion Inhibitors D. Snihirova, F. C. Montemor (Instituto Superior Técnico), W. Wijting, G. Grundmeier (Universität Paderborn), and S. Lamaka (Instituto Superior Técnico)
 

Tuesday, October 6, 2009

Hall L, Level 01 - Green

Galvanized Steel

Co-Chairs: H. Terryn and H. Katayama
TimeAbs#Title and Authors
08:00   1764   Edge Corrosion Behavior of Organic Coated Galvanized Steels in Atmospheric Environment H. Katayama (National Institute for Materials Science), Y. Miyahara, I. Shitanda, M. Itagaki, K. Watanabe (Tokyo University of Science), and H. Masuda (National Institute for Material Science)
08:20   1765   Role Of Magnesium In Corrosion Performance Of Zn-Mg And Zn-Al-Mg Alloy Coatings In Atmospheric Conditions. T. Prosek, A. Nazarov, and D. Thierry (Institut de la Corrosion / French Corrosion Institute)
08:40   1766   Analysis of Corrosion Products Formed by Edge Corrosion of Residual Coated Steel Sheets A. Tahara and T. Shinohara (National Institute for Materials Science)
09:00   1767   Corrosion Resistance of Pulse Zinc Coatings M. Zemanová (STU in Bratislava) and M. Cocural (Ecole Nationale de Superieure)
09:20   1768   Scanning Kelvin Probe Analysis of Cut Edge Corrosion on Prepainted Galvanized Steel with Chromate-containing Epoxy Primer I. Muto, K. Sato, and N. Hara (Tohoku University)
09:40   1769   Combinatorial Studies Of Thermally Interdiffused Magnesium On The Kinetics Of Organic Coating Cathodic Delamination From Zinc (Galvanized Steel) H. N. McMurray (University of Wales), Z. Barrett, and G. Williams (Swansea University)
10:00 Intermission (20 Minutes)
10:20   1770   Inhibition of Cathodic Coating Delamination on Zinc Electrocoated Steel Substrates by PVD Deposited Thin Aluminium Films. Z. Barrett, N. McMurray, and G. Williams (University of Swansea)
10:40   1771   Wet/Dry Cycle Corrosion Behavior Of Model Cut-Edge Formed On Zinc Coated Steels By Laser Fabrication M. Sakairi, A. Kageyama, and T. Kikuchi (Hokkaido University)
11:00   1772   Simulation of Solution Chemistry in Edge Corrosion T. Shinohara (National Institute for Materials Science)
 

Coatings for Steel

Co-Chairs: G. Williams and G.S. Frankel
TimeAbs#Title and Authors
11:20   1773   Characterization Of Corrosion Of Pipeline Steel Under Coating By Localized Electrochemical Impedance Spectroscopy F. Cheng (University of Calgary)
11:40   1774   Role of Additives in Improving Performance of Zinc Pigmented Polymeric Coating on Steel Reinforcement Bars Exposed in Chloride Contaminated Concrete Environment D. Singh and S. Das (National Metallurgical laboratory)
12:00 Intermission (180 Minutes)
15:00 Intermission (10 Minutes)
15:10   1775   The Effect of Humidity on TiO2 Photocatalysed PVC Photodegradation S. Cashmore, A. Robinson, and D. Worsley (Swansea University)
15:30   1776   Functionalized Talc-Like Phyllosilicates in a Sol-Gel Coating for Corrosion Protection of Carbon Steel K. Chabrol, J. Bonino, M. Gressier, M. Menu (CIRIMAT-LCMIE), and N. Pebere (CNRS)
15:50   1777   Analytical Investigations and Corrosion Behaviors of Organosilanes as Multifunctional Sol-Gel Pretreatments on Cold Rolled Steel M. Schiemer (CEST), M. Fleischanderl (Voestalpine Linz), and G. Fafilek (TU Wien)
16:10   1778   Novel Silane-Based Coating For Corrosion Protection Of Metallic Alloys M. Trueba and S. Trasatti (University of Milan)
16:30   1779   Effect Of Organosilicon Self-Assembled Nanolayers On Improving Anticorrosion Properties Of Polymeric Coatings On Iron And Aluminum M. A. Petrunin, L. B. Maksaeva, T. Yurasova, and E. Terekhova (Institute of Physical Chemistry and Electrochemistry n. A.N.Frumkin)
16:50   1780   Siloxane Self-assembled Nanolayers on Metal Surfaces and its Effect on Corrosion and Electrochemical Behavior of Aluminum and Magnesium L. B. Maksaeva, M. A. Petrunin, T. Yurasova, and E. Terekhova (Institute of Physical Chemistry and Electrochemistry n. A.N.Frumkin)
 

Gallery, Level 01 - Green

Poster session

Co-Chairs: G.S. Frankel
TimeAbs#Title and Authors
o   1781   Electrochemical Performance of Al-Ce Films Prepared on AA6061 Aluminum Alloy Substrate by DC Magnetron Sputtering M. A. Domínguez-Crespo, A. Torres-Huerta (Instituto Politécnico Nacional), S. Rodil (UNAM), and E. Ramírez-Meneses (IPN)
o   1782   Protection Of Copper By The Oil Composition Films In The SO2-Containing Atmosphere N. Shel (Tambov State Technical University), L. E. Tsygankova (Derzhavin State University), V. Vigdorovich (Tambov State Technical University), and O. Chetyrina (Derzhavin State University)
o   1783   Enhancement of Corrosion Resistance of Galvanized, Galva-Annealed, and Electrogalvanized Steel by Addition of Molybdenum and Magnesium in the Zinc Phosphate Solution C. Nam (Sunchon National University), J. Lee, K. Park (Soongsil University), and J. Lee (Sunchon National University)
o   1784   The Effect Of Silane And Hexavalent Chromate Conversion Coatings In The Electrochemical Behavior Of Zinc Coating M. Vallerius da Costa (UFRGS), C. Oliveira (Feevale - ICET), T. L. Menezes (UFRGS), D. A. Dalla Corte, I. Müller, and C. De Fraga Malfatti (PPGEM - UFRGS)
o   1785   Silane With Cerium Obtained By Sol-Gel Process For Post-Treatment On Zinc-Talc Composite Coatings D. A. Dalla Corte (PPGEM - UFRGS), M. Vallerius da Costa (UFRGS), C. Oliveira (Feevale - ICET), T. L. Menezes (UFRGS), I. Müller, C. De Fraga Malfatti (PPGEM - UFRGS), and M. Marchiori (IF - UFRGS)
o   1786   Role Of Polypyrrole Structure And Conformational Rearrangement On The Corrosion Protection Of Al Alloys M. Rizzi, M. Trueba, and S. Trasatti (University of Milan)
o   1787   Effect Of Corrosion Inhibitor Concentration Of Silane Films On AA2024-T3 Alloy C. Malfatti, T. Menezes (UFRGS), E. Rieder (ULBRA), D. A. Dalla Corte (UFRGS), J. Esteban, F. Ansart, and J. Bonino (UPS)
o   1788   Composite Coating with Nanoparticles of ZnO: Synthesis and Characterization M. Rauber, E. Rieder, F. Eisele (ULBRA), C. Malfatti, and D. A. Dalla Corte (UFRGS)
o   1789   Electrodeposition of Zn-Al Alloys from AlCl3-ZnCl2-Dimethylsulfone Molten Electrolytes K. Takenaka, Y. Mizuta, and T. Hirato (Kyoto University)
o   1790   Characterization of Electrolytic ZrO2/Al2O3 Coatings on STAVAX 420 Mold Steel C. Chang (Shu Zen College of Medicine and Management), H. Wu, and S. Yen (National Chung Hsing University)
o   1791   Corrosion Protection with Ultrathin Oxide Coatings Grown by Atomic Layer Deposition E. M. Härkönen, M. Ritala (University of Helsinki), L. Schmalz, M. Fenker (Forschungsinstitut für Edelmetalle und Metallchemie (FEM)), B. Diaz, J. Swiatowska, B. Normand (Centre National de la Recherche Scientifique (CNRS)), V. Maurice (Ecole Nationale Supérieure de Chimie de Paris), and P. Marcus (ENSCP, University of Pierre et Marie Curie)
o   1792   EIS Study on Coating Degradation under UV Irradiation M. Hattori (Chubu Electric Power Co.,Inc.), A. Nishikata, and T. Tsuru (Tokyo Institute of Technology)
o   1793   Oxygen Resistance of Organic/Inorganic Hybrid Layer for Passivating the Organic Light-Emitting Diodes S. Choi (Chung-Ang University), H. Shin (Chung Ang University), K. Kim, H. Lee (Chung-Ang University), J. Yoo, and C. Kim (Chung Ang University)
o   1794   Optimization of Plasma Electrolytic Oxidation Process Parameters for Modification of Ti6-Al4-V Corrosion Resistance B. Farshid, S. Mir Hosseini, M. Faghighi Sani (Sharif University of Technology), M. Meghdari (Azad University), and A. Raoufi (Niroo Research Institute)
o   1795   Poly(2,5-dimethoxyaniline) Film for Corrosion Protection of Iron J. Yano (Niihama National College of Technology), A. Muta, Y. Harima, and A. Kitani (Hiroshima University)
o   1796   Sol-Gel Coatings As Anticorrosion Coatings For Commercial Spectrally Selective Sunselect Surfaces M. Kozelj, A. Surca Vuk, I. Jerman, and B. Orel (National Institute of Chemistry)
 

Wednesday, October 7, 2009

Hall L, Level 01 - Green

Techniques for Coated Samples

Co-Chairs: M. Rohwerder and G. Grundmeier
TimeAbs#Title and Authors
08:00   1797   Investigation Of Degradation Processes At Defective Coated Metals By Scanning Electrochemical Microscopy Using Oxygen As Redox Mediator S. González and R. M. Souto (University of La Laguna)
08:20   1798   Application of AC-SECM in Corrosion Science: Inhibitors for Corrosion M. Paehler, K. Eckhard (Ruhr-Universitaet Bochum), J. Santana, R. M. Souto (University of La Laguna), and W. Schuhmann (Ruhr-Universität Bochum)
08:40   1799   Characterization of Organic Antifouling Coatings by EIS K. N. Allahar, V. Upadhyay, G. Bierwagen (North Dakota State University), and E. Risberg (Jotun A/S)
09:00   1800   Multiphyics Simulation of Coating Systems during EIS Measurements and Interpretation of Equivalent Circuit Elements B. Hinderliter and S. Croll (North Dakota State University)
09:20   1801   Study of the Corrosion of Al-Rich Metallic Coated Steel with Odd Random Phase Multisine EIS E. Tourwé, A. Alvarez-Pampliega, J. Jorcin (Vrije Universiteit Brussel), J. Gonzalez, F. Horzenberger (OCAS), H. A. Terryn, and A. Hubin (Vrije Universiteit Brussel)
09:40   1802   Combined Spectroscopic and Electrochemical Studies of Ultra-thin Conversion Layers at Polymer/Metal Interfaces N. Fink, R. Posner, G. Giza (Max-Planck-Institut fuer Eisenforschung), and G. Grundmeier (Max-Planck-Institut fuer Eisenforschung / University of Paderborn)
10:00   1803   Self-Assembled Monolayer / Au(111) Model Systems for Delamination Studies at Metal/Organic Interfaces M. I. Muglali (Max Planck Institute fuer Eisenforschung) and M. Rohwerder (Max-Planck Institute for Iron Research)
10:20 Intermission (20 Minutes)
 

Coatings for Mg Alloys

Co-Chairs: M. Forsyth and T. Shinohara
TimeAbs#Title and Authors
10:40   1804   Anti-Bacterial And Corrosion Properties Of Ag-Containing Oxide Coating On AZ31 Magnesium Alloy Formed By Micro-Arc Oxidation H. Ryu and S. Hong (Seoul National University)
11:00   1805   Insights Into The Nature Of Ionic Liquid Surface Film Formation On Reactive Metals M. Forsyth, W. Neil, P. Howlett, J. Lin, J. Efthimiadis, and D. Macfarlane (Monash University)
11:20   1806   An Anti-Corrosion And Wear-Resistance Coating On Magnesium Alloy With Trivalent Chromium Electrodeposition From An Eco-Friendly Bath C. Lin, Y. Yeh, and C. Huang (Chang Gung University)
11:40   1807   Novel Approaches in Designing Protective Coatings for Magnesium Alloys A. H. Makhlouf and M. Farahat (Central Metallurgical Research and Development Institute)
 

Deposited Films

Co-Chairs: H.N. McMurray and G.S. Frankel
TimeAbs#Title and Authors
14:00   1808   Coating Properties of Electrodeposited Layers with Self-Healing Effect A. Dietz and T. Hochsattel (Fraunhofer IST)
14:20   1809   High-Temperature Oxidation Resistance of Cr2AlC Coatings and Phase Stability of Cr2-XMxAlC (M = Y, Hf, Ta, Pd, Pt, Rh) M. To Baben (RWTH Aachen University), D. Hajas (ABB Switzerland Ltd), D. Music, B. Hallstedt, J. Emmerlich, and J. Schneider (RWTH Aachen University)
14:40   1810   The Corrosion And Wear Resistance Of Cr-C Deposited Steel Specimens With And Without Ni Undercoat C. Chuang, Y. Lieu, and C. Huang (Chang Gung University)
15:00   1811   Electrodeposition of Rhenium and Its Alloys from Aqueous Solutions A. Naor, N. Eliaz (Tel Aviv University), and E. Gileadi (Tel-Aviv University)
15:20   1812   Electrochemical Characterization of Ultra-thin Carbon Overcoats for Magnetic Hard Disk Components W. Kobsiriphat (National Metal and Materials Technology Center), L. Supadee, and K. Siangchaew (Western Digital (Thailand) Co., Ltd.)
15:40   1813   Deposit of Chromium Layers from Trivalent Chrome Electrolytes. J. Bohnet and K. Romankiewicz (Fraunhofer IPA)